Contact Us Close

Automotive

Scroll to top

Gusset and pedestal plug supply fans manufactured for the topcoat booth of an automotive plant in Mexico.

Fans

These Arrangement 9 airfoil plug fans are belt driven and meet our customer’s custom paint and special safety guarding requirements.

Did you know?

Northern Blower Inc. has installations in automotive plants throughout Canada, the United States and Mexico.

Northern Blower supplied 40 fans for thermal oxidizers, supply and exhaust for an automotive plant paint booth system in Texas.

Fans

Our 5000 series backward incline and airfoil fans of AMCA spark C construction were supplied in single and double-width configurations to satisfy the requirements of this project.

Did you know?

Northern Blower technical sales people handle your job from estimate to shipment and will work with you to ensure specific job requirements are understood and met.

Food Processing

Scroll to top

Northern Blower regularly supplies custom fans for oil removal and recovery systems applied in potato processing facilities.

Fans

From stainless steel polishing to continuous welds, stiffener configuration and drain hole location, this Backward Curved fan is about as food ready (and custom!) as it can be. It moves 18,000 CFM of 185°F air in a system with a 28″ WG static pressure loss.

Did you know?

Northern Blower can provide custom coating systems or fabricate equipment from corrosion resistant materials such as 304L, 316L or duplex stainless steel alloys to meet the needs of your specific application.

Beer! Now there's a critical application. These fans were supplied for operation at a brewery in the Southeast United States.

Fans

These Arrangement 9 fans were constructed entirely from 304L stainless steel with all welds continuous and ground smooth for this food grade, 210°F application.

Did you know?

Northern Blower is an industrial fan manufacturer. We have the design knowledge and experience to tailor our equipment meet your stringent application requirements.

Industrial Ventilation

Scroll to top

The fans on this project were manufactured to be gas tight for the ventilation exhaust from two phases of a nuclear waste treatment plant in the Pacific Northwest region of the United States.

Fans

The airfoil wheels on these Arrangement 8 fans are highly efficient and well suited to the clean airstream in this application. All Northern Blower wheels are balanced to G2.5 at a minimum.

Did you know?

Northern Blower is an industrial fan manufacturer. We have the design knowledge and experience to tailor our equipment meet your stringent application requirements.

This project in the UAE was for the supply of 52 ventilation and filtration fans for a large aluminum smelter. The equipment itself is not complex but the strict specifications, and extensive documentation required made Northern the supplier of choice.

Fans

The fans on this project are direct-driven, Arrangement 4. Our design 5312 Roof Exhausters have a three coat epoxy paint system applied to an SSPC-SP6 blast clean surface and our design 7620 Centrifugal BI fans are constructed of stainless steel and underwent weld passivation prior to shipment.

Did you know?

Northern Blower technical sales people handle your job from estimate to shipment and will work with you to ensure specific job requirements are understood and met.

These compactor dryer fluidizing and baghouse process fans were installed in a potash mine in Saskatchewan.

Fans

These Arrangement 1 fans have seal welded airstream and external joins to the fan housing to prevent corrosive particles from building up and causing premature deterioration.

Did you know?

Northern Blower is an industrial fan manufacturer. We have the design knowledge and experience to tailor our equipment meet your stringent application requirements.

Oil & Gas

Scroll to top

Northern Blower manufactured two industrial airfoil forced draft fans and one radial tipped ID fan for this hot oil heater application in Thailand.

Fans

The radial tipped induced draft fan for this project moved 148,000 CFM of 460⁰F flue gas. Welding and component design and fabrication was compliant to API-560 specifications.

Did you know?

Northern Blower is active in the creation and development of standards for the American Petroleum Institute. Northern Blower has petro-chemical installations on every continent.

Northern Blower manufactured two industrial airfoil forced draft fans for this direct fired heater application in Thailand.

Fans

These Arrangement 7 fans were supplied with inlet box mounted silencers and rain hoods. The fan housing, bearing and motor pedestals were mounted on an integral base.

Did you know?

Northern Blower builds our industrial fans in a purpose built manufacturing facility in Winnipeg, Canada. We adhere to strict internal quality policies and do not subcontract our manufacturing work.

Two induced draft and two forced draft fans were supplied for a hydrogen production process at a refinery in the mid-western United States.

Fans

Arrangement 3, center hung wheels with independent bearing pedestals and motor soleplates, these fans were built to American Petroleum Institute standard 560. The ID fans each move over 340,000 CFM at 410⁰F and are driven by 1750 HP medium voltage motors.

Did you know?

Northern Blower is CWB certified to CSA W47.1, analogous to AWS D14.6 and D1.1.

Petro-chemical

Scroll to top

Built to American Petroleum Institute standards, these fans power a furnace at a coal to liquid refinery in South Africa.

Fans

Arrangement 3, center hung wheels with independent bearings pedestals and soleplates.  The forced draft fan is rated at 950 HP while the induced draft, double-inlet, double-width fan is designed to handle 400⁰F flue gas and is rated for 1150 HP.

Did you know?

Northern Blower is active in the creation and development of standards for the American Petroleum Institute.

Northern Blower has petro-chemical installations on every continent.

Designed to withstand a corrosive environment, this scrubber exhaust fan is installed at a fertilizer production facility located in western Canada.

Fans

Arrangement 7, center hung wheel moves 77,000 CFM for a 25″ WG static pressure system. The airstream components of this Northern Blower design 4370 high-efficiency backward-curved fan are manufactured of 304L stainless steel.

Did you know?

Northern Blower is ISO 9001:2015 certified and has extensive experience coordinating specific quality reporting and project management requirements.

Pollution Control

Scroll to top

This double-width airfoil fan was designed for operation as a dust collector induced draft fan for a heat recovery steam generator at a carbon black facility in Alberta.

Fans

This direct-driven Arrangement 7 fan with integral inlet boxes moves 262,000 CFM flue gas at 320⁰F and comes with Northern Blower designed and manufactured inlet box dampers.

Did you know?

In our 60 years of operation, Northern Blower has become known for the quality and longevity of our equipment. We keep records of every fan we build and can access performance or parts information for even our oldest operating equipment.

This heavy duty airfoil fan was installed as part of a thermal oxidizer system for a plant in Singapore.

Fans

This direct-driven Arrangement 3 fan with integral inlet box provides almost 100,000 CFM airflow at 32″WG static pressure.

Did you know?

Northern Blower is a custom fan manufacturer. We can configure our equipment to fit almost any space or opening.

Deployed in an extremely corrosive atmosphere, Northern built 26 fans for a solar panel manufacturing plant in southern Europe.

Fans

Fan interior surfaces are coated with a PTFE barrier and special gasketing to resist the powerful acids present in the process. Equipped with the CE mark, fans range from 15 to 150 HP.

Did you know?

Northern Blower can provide custom coating systems or fabricate equipment from corrosion resistant materials such as 304L, 316L or Duplex Stainless Steel alloys to meet the needs of your specific application.

Northern Blower supplied the Forced Draft and IGR fans for a waste to energy boiler installed in Hawaii. (We should have planned more January site meetings)

Fans

The FD fan is a direct-driven, center hung industrial airfoil design capable of moving 138,000 CFM of air at 21″ WG static pressure. The IGR fan is a direct-driven, center hung backward curved industrial design moving 325⁰F air.

Did you know?

Northern Blower’s FanFinder® software gives you access to performance curves and sound data for your application requirements. Northern Blower inside technical sales team and representatives are always available to ensure you get the optimal fan for your needs.

Northern Blower manufactured a backward curved industrial forced draft fan for installation on a boiler for an oil refinery in Venezuela.

Fans

This Arrangement 7 fan is designed to be dual driven by electric motor and steam turbine. The fan and driver assembly is mounted to an integral base.

Did you know?

Northern Blower technical sales people handle your job from estimate to shipment and will work with you to ensure specific job requirements are understood and met.

Pulp & Paper

Scroll to top

Three identical induced draft fans were supplied for bark fired boilers at this oriented strand board facility in South Carolina.

Fans

These Arrangement 3 radial tipped fans each move 125,000 CFM of flue gas at 350⁰F. Each fan is direct-driven by a 450 HP motor.

Did you know?

Northern Blower is an industrial fan manufacturer. We have the design knowledge and experience to tailor our equipment meet your stringent application requirements.

Northern Blower supplied a Backward Curved Industrial fan with 304L stainless steel airstream construction and 2205 duplex wheel for a heat recovery system at a tissue plant in Quebec.

Fans

This Arrangement 1 fan with inlet box is belt driven with the fan and 200HP, 1800 RPM motor shop mounted on a unitary base. The assembly was designed for 400⁰F operating temperature with all stainless welds cleaned and passivated prior to shipping.

Did you know?

Northern Blower can provide custom coating systems or fabricate equipment from corrosion resistant materials such as 304L, 316L or duplex stainless steel alloys to meet the needs of your specific application.

Steel/Metal Processing

Scroll to top

Three identical heavy duty airfoil fans were installed in a steel mill in Kentucky.

Fans

These fans were built as Arrangement 3 double-width with inlet boxes and independent pedestals. Each fan was designed to provide 318,000 CFM at 25 inches water column static pressure and is driven by a 1850 HP, 1200 RPM motor.

Did you know?

Northern Blower is ISO 9001:2015 certified and has extensive experience coordinating specific quality reporting and project management requirements.

Three identical double-inlet, double-width backward inclined fans were manufactured by Northern Blower for installation in a steel mill in Nebraska.

Fans

These fans were built as Arrangement 7 with dependent pedestals and a common base with the 250 HP motor mounted in our facility.

Did you know?

Northern Blower technical sales people handle your job from estimate to shipment and will work with you to ensure specific job requirements are understood and met.